ION NeilPride Prolimit and RRD – Wetsuits for cold weather

The days are getting colder and colder. For those who chilly temperatures of air and water are not an abstacle for practicing their favorite extreme water sports such as kitesurfing and windsurfing – in SurfPM online store we have reduced prices almost double of most surf wetsuits.
Wetsuit neoprenes models for cold weather are of brands like NeilPride, Prolimit and Ion:

rrd ion neilpride wetsuits

Ion Wetsuit – Onyx Semidry Front Zip 5/4 DL 2013 Men 46/XS 299.99€ NOW – 149.99€
Ion Wetsuit – Strike Semidry 4,5 DL 2013 Men 46/XS 429.00€ NOW – 169.99€
Ion Wetsuit – Fuse Drysuit 4/3 DL 2015 Men – 52/L 699.99€ NOW – 489.99€
RRD Wetsuit – Celsius Chest Zip 5/3 2013 Men 98/MT 349.00€ NOW – 169.99€
NP Wetsuit – Origin SD 5/3 2013 Men 52/L 269.00€ NOW – 189.99€
Prolimit Wetsuit – Global Steamer Mesh 5/3 Men 217.00€ NOW – 109.99€

If you also don’t have boots, we recommend Ion Ballistic 6/5 boots – a few months ago we wrote about them on our blog.
Ion Ballistic 6/5 are really incredibly warm boots! Personally tested by our team in the cold February weather of 2015 with temperatures of air and water not more than 5-7⁰
Hurry, because the number of surf wetsuits in SurfPM warehouse is sensibly decreasing.

La Tribu – Kitesurf Center, Gokceada, Turkey

Kitesurf center La Tribu is located on the turkish island Gokceada.
It is open from the end of May until middle of september.

The Kitesurf Center offers:

Kitesurfing lessons for beginners, intermediate and advanced students
– Renting equipment
– Professional kite repair (kites, bars, lines, harnesses and boards)
– Storage
– Wi-Fi

JP Universal Nose Protector

Made of EVA, the JP NOSE PROTECTOR UNI is a very light yet strong protection. It is easy to handle as it is simply glued to the nose. The set consists of 5 pieces: 2 side parts (one Left and one Right), and 3 connections in sizes Small, Medium and Large. By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently. This makes it an universal protector not only for JP boards but for all boards available on the market.

CONSTRUCTION: Top-, Middle- and Bottom Layer
The hard top plastic prevents scratches and spreads the load to the middle layer consisting of high density EVA, further disperses the energy to the soft, low density EVA Bottom Layer which absorbs the load.

a. Prepare the materials:
– Adhesive (glue): Contact glue (e.g. Pattex Classic), Epoxy based 2K glues (e.g. UHU plus), Super Glue (e.g. Loctite), or any water prove and UV-stable power adhesives (read the instruction of the glue carefully to ensure it works)
– Tape
– Pencil
– Squeegee
– Sandpaper (80-100)
– Protective gloves
– Cleaning material

b. How to choose the right size of the front part: The nose protector shall be positioned as close to the outline (rail) of the board as possible. Therefore the biggest fitting connection shall be used. Due to the soft material and the flexible construction, the left and right part can be adjusted by bending them into the right position (parallel along the outline
of the board) Mark the right position of the protector on the board with a pencil.

c. How to fix the Nose Protector on a windsurfing board:
Glue the left, right part and connection together, and wait until the glue is dry! The surface of board and protector shall be dry and free of any oil and dust. Clean with standard commercial substances (e.g. white spirit) and sand the surfaces if necessary. Read and follow the instruction of the used adhesive carefully. Apply the adhesive in the marked area and if requested as well onto the nose protector (e.g. with  Pattex). Put the Nose Protector into position (start from the nose) and press firmly. Fix it firmly with tape until the glue is totally dry. Remove the tape.


Airsup RRD 2012 – available now!

RRD AirSup 2012

The first ever RRD inflatable SUP board. Designed and built to be used everywhere, by anyone. Great new improvement on the design of the two PVC skins and the inner cores, you can inflate the board up to 18 psi ( 1,2 bars) making the boards really nice and stiff.
A great new board technology that will make a big impact on the future of our sports.
–  Inflatable cross linked deck and bottom structure with HD PVC taped rails.
–  The new inflating technolgy that allows to use a high pressure up to 1,1 bars.
–  The stiffest/strongest inflatable structure ever built.
Equipped with a carrying bag, hi pressure special pump and repair kit. Elastic rope for drybag on the nose, tail leash ring, middle carry handle, nose towing ring.

Available size: 10’2″ x 32 x 4’1/2″ – 180Lts